Premium PLA Plus Filament 1.75 Orange - Torwell 1Kg

Premium PLA Plus Filament 1.75 Orange - Torwell 1Kg
PLA Plus filament 1.75 (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch.
Its extrusion-temperature is much lower than ABS and most often doesn’t require a heated bed.
Περιγραφή:
- Good toughness
- High strength
- High stiffness
- Less prone to blocked nozzles
- Can be processed at 200 degrees
- Low shrinkage, thermoforming dimensional stability
- Accurate diameter: 1.75mm, variations + /-0.1mm,roundness +/-0.05mm
Χαρακτηριστικά:
- Material: PLA Plus filament
- Diameter: 1.75mm
- Filament weight: 1 KG
- Print temperature: 190 - 235°C
- Best temperature: 200°C
- Bed temperature: 40-50°C or turn off the heated bed
- Compatibility: Most FDM 3D Printers
- Package: 1kg/spool
Materials Parameters:
- Density: 1.24 g/cm3, D1505
- Melt Flow Index: 3 g /10 min, 190°C/2.16kg
- Heat Distortion Temp: 47 °C
- Tensile Strength: 59 Kg/cm2
- Tensile Elongation: 25 %
- Flexural Strength: 55 Kg/cm2
- Flexural Modulus: 28300 Kg/cm2
- Impact Strength: 7.2 KJ/m2
- Diameter Accuracy: 1.75: 1.70~1.78 mm
Χαρακτηριστικά Νήματος | |
Υλικό | PLA Plus |
Διάμετρος | 1.75mm |
Βάρος | 1 KG |
Θερμοκρασία Εκτύπωσης | 190 - 235°C |
Προτεινόμενη Θερμοκρασία | 200°C |
Θερμοκρασία Βάσης - Bed | 40-50°C |
26,95€
Χωρίς ΦΠΑ: 21,73€
- Διαθεσιμότητα: Διαθέσιμο
- Κωδικός Προϊόντος: 19235